- 14 -
Pipe
Size
Minimum pipe length required to install the
Monobloc upstream line-in kit (mm) (A)
22 mm
203 mm
28 mm
203 mm
Step 2a:
Monobloc upstream line-in kit (22mm & 28mm)
The Monobloc upstream line-in kit includes:
1 - Monobloc unit
2 - Pressure gauge (upstream)
3 - Pressure gauge (downstream)
4 - Mainsboost vessel connector (see Step 1)
5 - Isolation valve (see Step 1)
NOTE: the Monobloc can be installed either horizontally or vertically but not upside
down. There are pressure gauge ports on both sides of the Monobloc to allow the
pressure gauges to be visable in any orientation. Follow the directional flow arrows
on the Monobloc to ensure correct installation.
Fig. 17a
3
2
1
Inlet
A
Outlet
