- 7 -
3 LOCATION - GENERAL
3.11
Access:
For emergencies and maintenance the Mainsboost
must
be easily accessible.
3.12
Protection:
The system must be located in a dry position, and
protected from freezing. Avoid environments which have a high
ambient temperature, high humidity or excessive condensation
and salt damage, etc.
3.13
Incoming mains water pressure:
An incoming water pressure of at least 2.0
bar is required and should not exceed 5 bar. (If mains pressure is below 2.0
bar the Mainsboost vessel should be supplemented with a pump unit, contact
Stuart Turner for details).
3.14 Ensure that location of the unit allows adequate space to give reasonable
access to all parts to accommodate service/commissioning.
3.15
Pipework:
Pipework should be sized to ensure optimum performance of the
system.
3.16
Direction of flow:
See Fig. 4 to identify the suction and discharge
connections.
