- 24 -
SECTION 9 - STRAINER REPLACEMENT
The parts required to replace the strainer are:
ITEM
QTY
31 Strainer
2
•
DISASSEMBLY
•
Pull out strainer (item 31).
•
REASSEMBLY
Reassembly is the reverse of the disassembly instructions with the new replacement parts
fitted as required.
•
INITIAL OPERATING INSTRUCTIONS
•
Consult instruction manual for commissioning instructions.
•
Do not run pump dry. Allow the water to be pumped to enter the pump body thus ensuring
the seal is lubricated before switching the pump on. Failure to do this will damage the
seal.
•
Carefully check pump and pipework for leaks whilst pump running and stationary before
leaving the installation unattended.
Stuart Turner reserves the right to amend specifications without notice.
Fig. 39
31
Flow Switch Body
