- 15 -
Cont ...
•
Locate the reed switch within the body groove as highlighted X-X (Fig. 25), and feed the tie
wrap through the second catch.
•
The tie wrap can now be pulled tight to secure the reed and excess cut to length as shown
(Fig. 26)
•
INITIAL OPERATING INSTRUCTIONS
•
Consult instruction manual for commissioning instructions.
•
Do not run pump dry. Allow the water to be pumped to enter the pump body thus ensuring
the seal is lubricated before switching the pump on. Failure to do this will damage the seal.
•
Carefully check pump and pipework for leaks whilst pump running and stationary before
leaving the installation unattended.
X
X
Fig. 25
Fig. 26
