45
Consult Your Hydraulic Power Source OEM manual(s) for a more detailed maintenance
schedule of your equipment.
STSI is not to be held liable for any discrepancy’s or errors in the schedule.
Basic M2-H (Hydraulic) Periodic Maintenance Schedule ***
Maintenance Items
Hydraulic Components on M2-H Unit
Every
8 hours
(daily)
Every 50
hours
(weekly)
Every
100
hours
Every 200
hours
(monthly)
Every
300
hours
Every
400
hours
Every
2000
hours
(or yearly)
Visual check of hoses and connections for oil leaks
0
Visual check of hoses for damage, wear, or kinks
0
Visual check of variable speed controller
0
Visual inspection of inline flow meter
0
Pump Components
Check General Condition Visual (Temperature, Unusual
Noise or Vibrations, Cracks, Leaks, Loose hardware.
0
Check & Fill grease cup for mechanical seal
0
Check pump mechanical seal for leakage (dripping)
0
Clean old grease build-up from inside of Grease Cup
0
Check front impeller clearance (wear plate)
0
Check rear impeller clearance (seal plate)
0
Inspect the check valve
0
Equipment Components
Wash out Jetting Tee
0
Remove & clean shear unit
0
General Condition Visual (Cracks, Leaks, Loose hardware
0
Clamps are tight and safety pins installed
0
Lube valve stems
0
Clean reservoir tank of build-up (internal)
0
Disassemble and visually inspect piping (internal)
0
Summary of Contents for M2-H
