background image

Deco

 

- Tape Saturation & Doubletracker User Manual

®

pg 12

Strymon Non-Transferrable Limited Warranty

Exclusions

This warranty covers defects in manufacturing discovered while using this product as recommended by 

Strymon. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, 

abuse, unauthorized modification, improper storage, lightning, or natural disasters.

Limits of Liability

In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the 

preceding paragraphs. Strymon will not be held liable to any party for damages that result from the failure of 

this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage 

to other equipment, and incidental or consequential damages arising from the use, or inability to use this 

product. In no event will Strymon be liable for more than the amount of the purchase price, not to exceed the 

current retail price of the product. Strymon disclaims any other warranties, express or implied. By using the 

product, the user accepts all terms herein.

How to Obtain Service Under this Warranty

For North American customers: Contact Strymon through our website at http://www.strymon.net/support for 

Return Authorization and information. Proof of original ownership may be required in the form of a purchase 

receipt.

For International Customers: Contact the Strymon dealer from which the product was purchased from in order 

to arrange warranty repair service. 

Strymon

®

 is a division of Damage Control

®

, LLC.

Warranty

Strymon warrants the product to be free from defects in material and workmanship for a period of one (1) year 

from the original date of purchase. If the product fails within the warranty period, Strymon will repair or, at our 

discretion, replace the product at no cost to the original purchaser.

REVB 10.3.14

Summary of Contents for DECO













Reviews: