Deco
- Tape Saturation & Doubletracker User Manual
®
pg 9
Press and hold the Doubletracker Bypass
footswitch to achieve a recording studio-inspired
Auto-Flange effect. This engages a “virtual audio
engineer” manning the faders and tape reels to
create a smooth and predictable through-zero
flange experience on the fly.
When the Doubletracker Bypass footswitch is
held down, the delayed Lag Deck is set just a bit
behind the Reference Deck. Then, the Blend and
Lag controls are simultaneously varied as the Lag
Deck ‘catches up’ to the Reference Deck at a speed
controlled by the Auto-flange Time setting. After
releasing the footswitch, the controls are smoothly
returned to their previous settings.
The 1/4” input can be set for either mono input or
TRS stereo input. The pedal ships in mono input
configuration from the factory. Here’s how to
change the input configuration:
Remove the back cover of your pedal. On the left
side of the circuit board, you’ll see a jumper that
can be set in two positions. Place the jumper on the
left 2 pins for TRS stereo input. Place the jumper
on the right 2 pins for mono input.
In order to use the TRS stereo input,
you’ll need a TRS stereo input adapter
like the one shown below.
Mono input
Stereo input
Auto-Flange Feature
TRS Stereo Input
RING
RIGHT 1/4” INPUT
LEFT 1/4”
INPUT
TIP
SLEEVE
TIP
RING
Press and hold
to engage the
instant Auto-Flange feature.
Release
to return the controls
to their previous settings.
Summary of Contents for DECO
Page 1: ... USER MANUAL ...
