Deco
- Tape Saturation & Doubletracker User Manual
®
pg 8
Bypass Modes
HOLD BOTH AT POWER UP
while turning the
BLEND knob to set Bypass Mode
Deco is set up for True Bypass from the factory. To change this mode,
hold down both Saturation Bypass and Doubletracker Bypass
switches
while powering up. While holding down, turn the
Blend
knob to one of two
ranges shown below.
TRUE BYPASS
Set here to use our True
Bypass circuit, which is simply
a mechanical relay to switch
the input signal directly to
the output, with absolutely no
components attached.
BUFFERED BYPASS
Set here to use our high-quality Analog Buffered
Bypass. This circuit features a 1Meg input
impedance, keeping the character of your guitar
pickup unaltered. The output impedance is 100
Ohms and can drive hundreds of feet of cable
without coloring your sound.
Summary of Contents for DECO
Page 1: ... USER MANUAL ...
