13
S
Caution
Do not attempt to push the spring arm beyond its stop(s). Doing so will cause damage to the spring
arm.
3. Remove and discard the protective cap on the spring arm.
4. Install the brake cover over the spring arm so that the keeper clip slots in the spring arm and brake cover
are aligned.
5. Push the end of the light head into the spring arm, and install the keeper clip.
6. Rotate the brake cover 180° until it is lined up with the hole, and install the brake screw.
3
4
2
5
1
Figure 9 - Attaching the Light Head
1.
Keeper Clip
2.
Brake Screw
3.
End of Light Head
4.
Brake Cover
5.
Slot
