Stryker SDC3, Manual

Page: 81 / 100

75
Server Settings
Settings for how the SDC3 interacts with the Studio3 Server, the DICOM server, Stryker Link and
Cloud Integration are accessible from the
SERVER
tab�
Studio3 Server Settings
1
7
8
9
2
3 4
5
6
1� Go to the Server tab, then select the STUDIO3
tab to go to the Studio3 Server Settings
screen�
2� Enter the Studio3 server IP address in the IP Address field�
3� Enter the Studio3 server Port number in the Port field�
4� Press the
ECHO button to test the Studio3 server connection� Valid server credentials are
confirmed by an “Echo Successful” message shown in the status bar�
5� Select the Allow Deletion of Pending Cases checkbox to allow deletion of pending cases
from the Studio3 archive list�
6� Set the amount of times the SDC3 attempts to transfer data to the Studio3 server in the
Maximum Transfer Attempts field� The default value is five attempts�
7� The dropdown menu lists available FTP Buffer Sizes�
8� The default Max Queue Size is 1000� Alternate values can be entered in this field�
9� Press the
SAVE
button to save settings�