Stryker SDC3, Manual

Page: 43 / 100

37
To save to a Network location
Note: Video does not save to a Network location unless “Network” is checked on the Save Settings
screen � See the “Save Settings” section of this manual for details�
9� The Send via Network drop-down menu provides names of available network addresses�
Note: In the Save Settings screen , “FTP” or “PACS” must be selected. If “FTP” is
selected, the drop-down menu is populated with IP addresses. If “PACS” is selected, it is
populated with connection names.
10� If “PACS” is selected in Save Settings, the AE Title and IP address of the selected connection is
shown�
11� Press the
NETWORK SAVE
button to save to the selected network� Cases can be saved
to another network after the previous save action is completed�
12� The progress bar shows the status of the write process�
Other functions
13� Select the
SETTINGS
tab to open the “Save Settings” screen�
Saving to a Network
When you save data to a network location, you are first required to log in�
4
3
2
1
1� Select the type of network transmission:
• Secure—for secure transmission of data to the network� Data is encrypted� A username
and password is required�
• Password—for password-protected access to the network� A username and password is
required�
• Anonymous—for open access to the network� Username and password are not required�
2� If required (per type of network selected), enter the username and password�
3� Press
OK.
4� Press the
EXIT
button to close the login screen�