Stryker Power-PRO XT 6500 Operation And Maintenance Manual Download Page 24

Page: 24 / 172

6500-509-001 REV B

www.stryker.com

The Stryker Cot Fastener Systems are designed to be compatible only with cots which conform to the installation
specifications listed on

page 25

WARNING

It is the responsibility of the cot operator to ensure that the cot being used in the Stryker Cot Fastener Systems meets the
installation specifications listed on

page 25

. Injury may result if a non-compatible cot is used in the Stryker Fastener

System.

Note:

Adjustment of the rail clamp assembly may be required in order to compensate for any variation in the cot

retaining post position depending on the cot manufacturer and model number.

For more information about the Stryker Cot Fastener Systems, see the Cot Fastener Operations/Maintenance Manual
(6370-009-001).

Cot Fastener Installation

Summary of Contents for Power-PRO XT 6500













































































































































































Search results

Summary of Contents for Power-PRO XT 6500

Reviews:

Related manuals for Power-PRO XT 6500

Brands by name

Popular brands

Stryker Power-PRO XT 6500, Operation And Maintenance Manual

Search results

Summary of Contents for Power-PRO XT 6500

Reviews:

Related manuals for Power-PRO XT 6500

Brands by name

Popular brands