Stryker Power-PRO XT 6500 Operation And Maintenance Manual Download Page 65

Page: 65 / 172

www.stryker.com

6500-509-001 REV B

Return To Table of Contents

INSTALLING THE HEAD END STORAGE FLAT

To install the optional head end storage flat (see Figure 54):

1. Install the Velcro

straps (A) near the pneumatic cylinder and around the cross bar of the retractable head section.

2. Buckle the restraint straps (B) around the outer rails of the retractable head section.

WARNING

When the optional head end storage flat is being used, ensure that it does not interfere with the operation of the
retractable head section, safety bar and safety hook. Injury to the patient or operator could result.

CAUTION

• Do not store items under the cot mattress. Storing items under the mattress can interfere with the operation of

the cot.

• The weight of the equipment in the head end storage flat (if equipped) must not exceed 40 pounds (18 kg).

Optional Accessories

Figure 54: Head End Storage Flat

V-Tube

Cross Bar

Summary of Contents for Power-PRO XT 6500













































































































































































Search results

Summary of Contents for Power-PRO XT 6500

Reviews:

Related manuals for Power-PRO XT 6500

Brands by name

Popular brands

Stryker Power-PRO XT 6500, Operation And Maintenance Manual

Search results

Summary of Contents for Power-PRO XT 6500

Reviews:

Related manuals for Power-PRO XT 6500

Brands by name

Popular brands