Stryker IsoAir, Maintenance Manual, Page: 22 / 94

A
B
F Fiig gu urre e 1 13 3 –– C Ca ab blle e ssp piirra all w wrra ap p a an nd d A AS ST T cca ab blle e
13. Discard the pump connector and four hoses.
14. Reverse steps to reinstall.
15. Plug the pump cord into an accessible outlet.
16. Run the pump diagnostic test. All tests must pass.
N No otte e -- Watch each test when you run the pump diagnostics. Confirm that the correct cell inflates the air hoses AS, BS,
SBR, and LAL. The diagnostic test cannot identify if the connected lines are correct or incorrect.
A Aiirr
h ho osse ess
D De essccrriip pttiio on n
AS A cell line
BS B cell line
SBR Side bolster line
LAL LAL line
17. Verify proper operation before you return the product to service.
S Su up pp po orrtt ssu urrffa acce e tto op p cco ovve err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• None
P Prro occe ed du urre e::
1. Raise the bed height to the highest height position.
2. Place the litter surface in a flat, horizontal position.
3. Unzip the top cover.
4. Remove and discard the top cover.
5. Attach the new top cover. Start the zipper at the head end and stop at the foot end.
6. Verify proper operation before you return the product to service.
EN 20 2941-109-002 Rev AA.0