Chapter 2
Operation Guide
17
2.14 FOOT BOARD CONTROL PANEL GUIDE
A1:
Press to lock out Fowler controls at both head siderails. The Fowler padlock icon will come
on. Press again to unlock.
A2:
Press to lock out Knee Gatch controls at both head siderails. The Knee Gatch padlock icon
will come on. Press again to unlock.
A3:
Press to lock out the bed height adjustment (Hi-lo) at both head siderails (outer sides). The
Hi-lo padlock icon will come on. Press again to unlock.
N
N
O
O
T
T
E
E
The foot board controls are not affected by the lockout switches.
Lockout settings are automatically saved in the event of a power failure and restored following
resumption of power.
B1:
Press to raise Fowler
B2:
Press to lower Fowler
C1:
Press to raise Knee Gatch
C2:
Press to lower Knee Gatch
D1:
Press to raise the sleep surface
D2:
Press to lower the sleep surface
E1:
Press to obtain the Trendelenburg position (head down, foot up)
E2:
Press to obtain the reverse Trendelenburg position (head up, foot down)
N
N
O
O
T
T
E
E
To replace the sleep surface to horizontal position after a Trendelenburg positioning, simply use
the bed height controls to either raise or lower the sleep surface to its limits. Then position the
bed to the desired height.
F:
Contour positioning control. The Contour positioning function is operational by default
(padlock icon off). To deactivate it, press on the Contour switch (F) (padlock icon lights up). The
Contour and Knee Gatch lockout controls are interrelated, activating one activates the other.
2.15 FUNCTION LOCKOUT USAGE
Whenever a patient or visitor should be restricted from operating the siderail controls, activate
the appropriate lockout switch (A1, A2, A3, figure 2.16) in the foot board control panel. The
lockout switches are for the safety of the patient. Use them when appropriate.
N
N
O
O
T
T
E
E
The padlock icon related to the function that is locked will light up.
Figure 2.14
B1
B2
C1
C2
D1
D2
E1
E2
F
A3
A2
A1
Summary of Contents for BERTEC GOBED PLUS FL20E
Page 2: ......
