Stryker 7600-000-050, Maintenance Manual

Page: 36 / 78

C
A
B
F Fiig gu urre e 1 15 5 –– P Po ow we err cco orrd d
H He ea ad d e en nd d ssiid de erra aiill h ho oo op p rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• #2 Phillips screwdriver
• Flat screwdriver
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
4. Raise the siderail to the full upright and latched position.
5. Remove the mattress.
6. Remove the part number label from the head side of the control box assembly.
7. Using a flat screwdriver, carefully pry the outer panel away from the siderail hoop until the hoop fully unsnaps from the
inner panel.
8. Unplug the cable connecting the siderail control panel to the control box.
9. Remove the siderail control panel.
10. Using a #2 Phillips screwdriver, remove and save the cover screw on the bottom of the siderail hoop on either side of the
siderail pivot.
11. Using a flat screwdriver, carefully pry outward on the siderail pivot cover.
12. Using a #2 Phillips screwdriver, remove and discard the six screws (A) that secure the siderail hoop (B) to the siderail
mechanism (Figure 16).
N No otte e -- Support the siderail hoop while removing the screws so the siderail hoop does not fall.
13. Remove and discard the siderail hoop.
14. Reverse steps to reinstall.
15. Verify proper operation of the product before returning it to service.
EN 32 SK-7600 REV 06