Stryker 7600-000-050, Maintenance Manual

Page: 30 / 78

• Hammer
• 3/8 in. drive ratchet
• 13 mm socket
• 13 mm combination wrench
P Prro occe ed du urre e::
1. Apply the brakes.
2. Raise the product to the highest height position.
3. Power down the bed and unplug the power cord from the wall outlet.
4. Raise the siderail to the full upright and latched position.
5. Using a 3/8 in. drive ratchet and 13 mm socket with a 13 mm combination wrench, remove and discard the bolt, spacers,
and nut that secures the head end siderail gas cylinder to the fowler (backrest) frame.
6. Using a large flat screwdriver and a hammer, remove one of the push nuts (A) that secures the bottom of the head end
siderail gas cylinder (C) to the siderail mechanism (Figure 10).
7. Remove the pivot pin (B) (Figure 10).
8. Remove and discard the head end siderail gas cylinder (C).
9. Reverse steps to reinstall.
10. Verify proper operation of the product before returning it to service.
C
B
A
F Fiig gu urre e 1 10 0 –– H He ea ad d e en nd d ssiid de erra aiill g ga ass ccyylliin nd de err
F Fo oo ott e en nd d ssiid de erra aiill g ga ass ccyylliin nd de err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• Large flat screwdriver
• Small flat screwdriver
• Hammer
EN 26 SK-7600 REV 06