Stryker 6516 Operation Manual Download Page 49

Page: 49 / 70

Fiig

urre

e 2

9 –– IIn

nsstta

alllliin

g tth

e cch

arrg

err

erriin

g tth

e cch

arrg

err

TIIO

•

Always place the electrical S

T charger power cord where it will not be stepped on, tripped over, or otherwise

subjected to damage or stress.

•

Do not touch the S

T Pak receptacle terminals with metal objects.

To power the S

T charger (Figure 30):

1. Locate the power connection (A) on the back of the S

T charger.

2. Push the power cord retention tab (B) in to insert the power cord outlet connector into the S

T charger power

connection.

3. Plug the power adaptor end of the power cord into the power source.

It is a best practice to use a clean, uninterruptible power source. The S

T charger continuously illuminates a solid green

power LED when it is connected to a power supply.

Use only Stryker-approved parts to power the S

T charger.

6516-209-001 Rev D.0

Summary of Contents for 6516







































































Search results

Summary of Contents for 6516

Reviews:

Brands by name

Popular brands

Stryker 6516, Operation Manual

Search results

Summary of Contents for 6516

Reviews:

Brands by name

Popular brands