F
Fiig
gu
urre
e 1
17
7 –– P
Pu
um
mp
p a
asssse
em
mb
bllyy
5. Using a T15 Torx driver, remove the four screws (A) that secure the pump assembly (AG) to the foot box (Figure 17).
Save the screws.
N
No
otte
e -- During reinstall, torgue the screws (A) to 22 ± 4 in-lb.
6. Move the pump assembly to the side to clear the area in front of the manifold.
7. With a firm grasp on the manifold hose, pull straight out and twist to remove the hose from the manifold.
N
No
otte
e -- Try not to damage the manifold barb when you remove or install.
8. Grasp the resonator hose and hold the resonator while you pull the resonator hose out.
9. Remove and discard the pump assembly.
10. Reverse steps to reinstall.
N
No
otte
e
•
During reinstall, hold the pump springs while you tighten so the pump springs do not turn.
•
During reinstall, do not allow the pump hose to kink or bend.
•
During reinstall, align the V
Ve
ellccrro
o® patches.
•
After installation, remove the zipper pull tool or equivalent from the zipper.
•
Cover the zipper with the support surface cover watershed.
•
Do not dispose of as unsorted municipal waste. See your local distributor for return or collection systems available in
your country.
11. Verify proper operation before you return the product to service.
EN
38
2973-009-002 Rev AB.0
Summary of Contents for 297300000000
