N
No
otte
e
•
During reinstall, make sure to align the V
Ve
ellccrro
o® retainers.
•
After installation, remove the zipper pull tool or equivalent from the zipper.
•
After installation, pull the watershed cover over the zipper.
14. Run the leak diagnostic test. See
Accessing the IIsso
olliib
brriiu
um
m PE Diagnostic Menu
in the P
Prro
oC
Cu
uiittyy Maintenance Manual.
15. Verify proper operation before you return the product to service.
A
Acccce
essssiin
ng
g tth
he
e ffo
oo
ott b
bo
oxx cco
ovve
err
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
Zipper pull tool or equivalent
•
T15 Torx driver
P
Prro
occe
ed
du
urre
e::
1. Apply the brakes on the P
Prro
oC
Cu
uiittyy bed frame.
2. Unplug the support surface power/data cable from the bed.
3. Remove the headboard and footboards and set aside.
4. Lower all the siderails.
5. Unsnap the two secure snaps (C) at the foot end corners (Figure 8).
6. Unsnap the two foot end corner retainers (B) (Figure 8).
7. Insert a zipper pull tool or equivalent through the hole in the zipper slider to unlock.
8. Using the zipper pull tool or equivalent, unzip the support surface top cover from the bottom cover (A) (Figure 8) and
stop unzipping at the middle of the opposite side (D).
N
No
otte
e -- The zipper starts on the patient right side near the foot end.
EN
28
2973-009-002 Rev AB.0
Summary of Contents for 297300000000
