A
B
C
F
Fiig
gu
urre
e 1
1 –– T
To
op
p cco
ovve
err
8. Insert a zipper pull tool or equivalent through the hole in the zipper slider to unlock.
9. Use the zipper pull tool or equivalent, to unzip the support surface top cover (A) from the bottom (Figure 1).
10. Remove and discard the top cover.
11. Reverse to install the new cover.
N
No
otte
e
•
After installation, remove the zipper pull tool or equivalent from the zipper.
•
Cover the zipper with the support surface cover watershed.
12. Verify proper operation before you return the product to service.
C
Co
ovve
err rre
ep
plla
acce
em
me
en
ntt,, b
bo
otttto
om
m
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
Zipper pull tool or equivalent
N
No
otte
e -- A minimum of two operators are required to replace the bottom support surface cover.
P
Prro
occe
ed
du
urre
e::
1. Apply the brakes on the P
Prro
oC
Cu
uiittyy bed frame.
2. Unplug the support surface power/data cable from the bed.
3. Remove the power/data cable from the strain relief bracket.
4. Remove the headboard and footboards.
5. Lower all the siderails.
6. Loosen and remove the retainer straps (A) that hold the support surface to the Fowler (Figure 2).
7. Before you turn over the support surface, place a protective sheet on the surface where you will rest the support surface
top.
8. Using two operators, turn the support surface over.
2973-009-002 Rev AB.0
23
EN
Summary of Contents for 297300000000
