Stryker 2941-000-001, Maintenance Manual

Page: 27 / 88

4. Using a pick, remove the bumpers (A) from the back pump housing (Figure 10). Discard the bumpers.
A
A
F Fiig gu urre e 1 10 0 –– B Bu um mp pe errss
5. Place and press the bumpers in place.
F Fo oo ott rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• T20 Torx driver
• 6 mm socket
• Ratchet
P Prro occe ed du urre e::
1. Unplug the power cord from the wall outlet.
2. Unplug the support surface tubing from the pump.
3. Place the pump face down on a work surface.
4. Using a T20 Torx driver, remove the six screws that secure the back pump housing to the front pump housing. Save the
screws.
5. Rotate the pump assembly to the right, so the front of the pump is on your left.
6. Separate the front and back pump housing. Place the back of the pump down on the work surface.
7. Using a ratchet and a 6 mm socket, remove the six nuts (A) that secure the foot (B) to the front pump housing (Figure
11). Save the nuts.
2941-009-002 Rev B.0 23 EN