Struers TegraDoser-5, Instruction Manual

Page: 13 / 256

TegraDoser-5
Instruction Manual
9
The display on the front panel provides different levels of status
information. For example, when the machine is switched on using the
Mains switch located at the rear of the TegraPol, the display informs
you which software version is installed:
When operating TegraDoser-5, this display is the user-interface to its
software.
The display is primarily divided into 3 areas. The position of these
areas and the information they contain are explained in the
illustration below, which uses the METHOD GROUPS Menu as an
example:
A
Heading:
this is a navigational aid, telling you where you are in the
software’s hierarchy.
B
Information fields:
these will either be numerical values or text fields providing
information associated with the process shown in the heading.
The inverted text shows the cursor position.
C
Function key options:
the functions of these keys change depending on the individual
situations.
When pressing a key, a short beep indicates that the command has
been accepted, whereas a long beep indicates that the key cannot
be activated at the moment.
Reading the Display
Acoustic Signals
A
B
C