TegraDoser-5
Instruction Manual
6
TegraDoser-5 comes complete with a 7-nozzle dosing head and
tubing to allow it to be mounted on the TegraForce.
Swing the dosing nozzle arm aside to gain access to the D-sub
connector.
Insert the dosing head into the recess on the side of the
TegraForce.
Press downwards until the dosing head is in position.
Insert the included screw and tighten it to secure the dosing
head.
Swing the dosing nozzle arm back into position under the body
of the dosing head.
Make sure that the tubes from TegraDoser-5 are not taut so that
the TegraForce can be turned freely.
7-nozzle Dosing Head
Note
The length of the tubes between TegraDoser-5 and the dosing head
determine the distance between the TegraForce and TegraDoser-5.
The factory-mounted tubes are of optimal length and it is not recommended
that this length be increased.
Fitting the Dosing Head to the
TegraForce
D-sub connector
on TegraForce
Dosing head
after installation
Dosing nozzle arm
Summary of Contents for TegraDoser-5
