Strongway 46271, Owner'S Manual

Page: 17 / 26

17
6. Replace the Oil Fill Screw.
7. Perform the Air Purge Procedure.
ADDITIONAL WARNINGS:

DO NOT USE MOTOR OIL IN THE JACK.

ONLY USE ANTI-FOAMING JACK OIL.

ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.

DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR
DIRTY OIL.

USE OF A NON-RECOMMENDED FLUID CANCAUSE DAMAGE TO A JACK.

AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE
FAILURE OF THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.

DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
LUBRICATION
1. Clean the outside of the press with a dry, clean, and soft cloth. Periodically lubricate all joints and
moving parts with a long lasting lubrication oil. Apply as needed.
2. When not in use, the Pump Unit should be stored with the Release Valve open and the Pump Piston
fully retracted.