Strongway 46271, Owner'S Manual

Page: 11 / 26

11
BEFORE USE
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly
with the product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Inspect before each use. Do not use if bent, broken or cracked components are noted.
OPERATION
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. Adjust the bed frame pins (13) to desired height. Ensure bed frame is fully rested on the bed frame
pins.
2. Place the bolster plates (22) on press bed frame (21), then insert work piece onto the bolster plates.
3. Place work piece on the bed frame or pressing block, use every precaution necessary to ensure
safety and to prevent accidents. Position work piece in a manner which will not allow it to
inadvertently fall from the bed frame or pressing block.
4. Close the release valve by turning it clockwise until it is firmly closed.