Strongline MEG1000i, Instruction Manual

Page: 83 / 84

82
4. Generator may not be correctly
ventilated with free flowing air
4. Check and make sure that the generator is located in a
appropriately ventilated environment. If not relocate the
generator to a well-ventilated location.
5. Generator fuel cap breather set on
the closed position
5. Check that the generator fuel cap has the breather
located switch located on the “on” position, allowing air to
mix with the fuel. If the breather cap is located in the “off”
position rotate switch on the cap to the “on” position.
6. Generator air filter may need
cleaning
6. Remove the air filter. Check to make sure that the air
filter is clean. If required clean, dry and re-install the air
filter.
7. Generator fuel filter may be blocked 7. The internal in-line filter may be blocked. Contact your
service agent for a service/replacement of the fuel filter.