Strongline MEG1000i, Instruction Manual

Page: 80 / 84

79
30
、
、 、
、
Cleaning
1. Keep your machine clean. The outside of the machine can be cleaned using a damp soft cloth with a mild detergent if
required. Never use water to clean the generator as it may cause damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts; these include products containing benzene,
trichloroethylene, chloride and ammonia.
3. Use a vacuum to clean air inlet and outlet louvers of the alternator.
4. Take special care to keep the ventilation inlets/outlets free from obstruction; cleaning with a soft brush followed by a
compressed air jet will usually be sufficient to ensure acceptable internal cleanliness.
5. Wear eye protection when carrying out cleaning.
CAUTION. Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is
recommended.
31
、
、 、
、
Repairs
Only an authorized service centre should repair the generator.
32
、
、 、
、
General inspection
Regularly check that all the fixing screws are tight. They may vibrate loose over time.