is possible. Just wait a few seconds and your receiver will switch to the selected channel or press
Ok
immediately after selecting the channel number.
6.1.2 Channel list
Press
Ok
in viewing mode to display the
Channel List
. Use
pq
in the channel list to highlight your
channel of choice and press
Ok
once to select the highlighted channel. Press
Ok
again to leave the
channel list mode. Inside the channel list it is possible to use the
PG+/PG-
buttons as well in order to
scroll page-wise through the list.
TIP:
Use
tu
to toggle between the
All Channel
list and favourite list(s) or press
fav
in
viewing mode for a list of available favourite lists.
6.1.3 Using the
pq
buttons
p
switches to the next channel.
q
switches to the previous channel.
6.2 Info banner
While watching TV you can press the
INfO
button at any time to access current information about the
channel and event*. Press
INfO
twice for extended EPG details about the current channel. Press
INfO
three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press
aUDIO
in viewing mode. A list with available audio streams will now be displayed. Use
pq
to
select the desired stream and confirm with
Ok
. The audio channel as stereo, mono, left and right can be
selected with the
tu
buttons.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the
TTX
button in viewing
mode and use the
0~9
buttons to input the number of the page you wish to see. The coloured buttons
of the remote control allow you to jump to selected pages directly, as indicated on the bottom of the
Teletext screen. Use the
pq
buttons to select one page up or down, use
tu
buttons to select subpages.
Press
EXIT
or
TTX
to get back to viewing mode.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press
SUbTITlE
in viewing mode to display a list
of available subtitle languages. Select your subtitle of choice with
pq
and press
Ok
to confirm. Press
EXIT
to leave without making changes.*
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then
most likely subtitles can be activated via Teletext if available.
6.6 Timeshift
Timeshift allows you to pause live broadcasts and resume playback later. To activate this function, set
the Timeshift mode in the
DVR Setting
menu to on by selecting
Pause
. For details, see
7.6.3
. Press
2
in
viewing mode to activate Timeshift. The progress information banner appears on screen. Live TV keeps
playing for moment and will then pause. Press
u
to resume Timeshifted playback. Press
3
to return to
live TV.
NOTE:
Timeshift and its playback only work properly when a fast USB storage device such
as a USB2.0 HDD is connected to the receiver. Timeshift and playback of HD content
requires sufficient read/write speed of the used USB storage device.
7
English
PaRT 1 • English
