NOTE:
Availability of Audio tracks, Teletext data and Subtitles depends on
broadcast.
7.5 AV Setting
Use this menu to match your receiver to your TV set.
The following settings are available:
Resolution
If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
576i
:
For analogue TVs (on Scart connection).
576p
:
For digital SD TVs (some digital TVs do not support this mode).
720p
:
For digital HD TVs (on HDMI connection).
1080i
:
For digital HD TVs (on HDMI connection).
1080p
:
For digital HD TVs (on HDMI connection).
Aspect Mode
:
Select the aspect ratio that matches your TV. This is either a 4:3 or a 16:9
possibility. Select in combination the preferred conversion method how to
show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The
options are:
Auto
A 16:9 or a 4:3 program will be show according to the content data included
in the broadcast.
4:3 Letterbox
The full 16:9 programme will be displayed on your 4:3 TV set with black bars
above and below the picture
4:3 Pan Scan
A centre cut-out of the 16:9 programme will be displayed full-screen on your
4:3 TV, missing content to the left and right.
16:9
Letterbox
A 4:3 programme will be shown normally on a 16:9 screen, but with black
bars to the left and right.
16:9 Pan Scan
A 4:3 programme will be shown as a centre blow up to fill the whole 16:9
screen, missing content to the left, right, top and bottom of the programme.
Video Effects
Options are:
Default
,
Vivid
, and
Standard
. Colours and Luminance can be
adapted to your taste or screen
Audio Output
Audio available on the S/PDIF connector. Options are:
PCM Output
,
Force
SPDIF Out
.
Bitstream Output
PCM Output
will only forward PCM 2.0 audio format to the output.
Bitstream
Output
will also forward compressed Dolby Digital 5.1 to the S/PDIF, if available.
Force SPDIF Out
will
only forward audio to the S/PDIF connector, not on HDMI or SCART.
Audio Description
Audio Description can be offered by a broadcaster as a service to Visual
Impaired people. The video content will be described by a narrator. When set
to
On
, if the AD track is available, will be mixed automatically with the original
sound.
AD Volume Offset
The volume of the AD track can be adapted to make a better mix with the
original sound.
HDMI CEC
Implementation of CEC is not equally by TV manufacturers. Usually, it works
good between equipment from one manufacturer. If it causes problems,
select
Off
.
14
