Strong SRT 6200 User Manual Download Page 7

7

3. SaT oUT   

To connect an extra receiver to the satellite signal from dish

4. SaT In    

To connect to the LNB for satellite signal from dish

5. Tv SCaRT  

 To connect to your TV set using a SCART cable.

6.  vCR SCaRT 

 To connect to your DVD or video recorder using a SCART cable. 
The video signal will be looped through to your TV set if receiver is 
in stand-by mode.**

7. video RCa  

To connect to your TV set using RCA cable*

8. audio l/R RCa 

To connect to your TV set or amplifier using RCA cinch cable*

9. S/pDIf Digital audio output  
   

 

To connect to the input of your digital audio amplifier.

10. power Cord 

 Your receiver requires a power supply of 100~240 V AC (Auto-
selectable), 50/60Hz +/-5%. Make sure to check the power 
specification before connecting your receiver to the wall outlet.

* only SRT 6205; ** only SRT 6202 and SRT 6205

2.2 Remote Control Unit

Fig. 3

 

 

Turns the receiver On/Stand-by.

 

 

Mutes the audio outputs of the receiver.

0~9 

 

Changes channel and controls numeric functions 

av 

 

Toggles between TV and receiver (AV) mode

Tv/R 

 

Toggles between TV or radio mode

MenU   

Opens the main menu 

eXIT  

 

Exits from the menu or sub-menu and cancels the progressing function if applicable.

pq 

 

 Changes the current program to the previous/next program in TV mode. 
Moves the cursor up/down in menu mode.

tu 

 

 Increases/decreases the volume level in viewing mode.  
Changes the setting values in specific menu item in menu mode.

oK  

 

Activates the highlighted menu item. Displays the channel list in viewing mode 
according to the selected list.

fav  

Opens the FAV list and toggles the favourite mode.

epg  

Shows the EPG (Electronic Program Guide) in viewing mode.

v+ / v-   

Increases/decreases the receiver volume level

Info   

Shows information banner

aUDIo   

 Selects available audio language(s) for the watched channel. 
Selects stereo ((•)), left-mono ((• or right-mono •)).

ZooM  

Opens Zoom selection for the desired part of watched channel / picture.

p+ / p-   

Page up and down in all list modes.

SaT/ReD 

Selects satellite list in channel list mode 

TeXT/gReen  Opens the current Teletext of a channel (if available).
SUb/YelloW  Shows list of subtitle languages available for the current channel.
RCl/blUe 

Opens the list of last watched channels.

Summary of Contents for SRT 6200


















Reviews: