6
1.3 equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please
follow the instructions below:
n
Refer to the user manual of your TV and your antenna.
n
Make sure that the SCART cable and outdoor components are in a good condition and
the SCART connections are well shielded
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
WaRnIng: Indicates a warning message for your necessary attention.
Tips:
Indicates any other additional important or helpful information.
MenU
Represents a button on the remote control or the receiver (bold Character)
Move to
Represents a menu item within the On Screen Display.
(Italic Character)
1.4 accessories
n
User’s Manual
n
1 Remote control unit
n
2x Batteries (AAA type)
note:
The batteries should not be recharged, disassembled, electrically short-circuited,
be mixed or used with other types of batteries. If rechargeable accumulators
instead of batteries are going to be used, we recommend using (e.g. NiMH) types
with low self-discharge to ensure long time operation of remote control.
1.5 Usage of external USb devices
n
It is recommended to use USB 2.0 storage devices. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the
receiver would not work properly.
n
If you are going to use external USB HDD (Hard Disk Drive) please consider that it might
be the case that the power specifications exceed the supported output of your receiver
(5V/500mA). If so, please connect your USB HDD to an according external power
adapter.
n
To ensure best performance of your USB storage device please format it by this receiver
(menu
“Recording Device”
) to FAT32 system. Other file systems are not supported by the
receiver.
n
STRONG cannot guarantee compatibility to all types of USB storage devices.
2.0 YoUR ReCeIveR
2.1 Rear panel
Fig. 2
1. To Tv
To connect to your TV using a coaxial cable or if you have a cable
connected to the ANT input from your TV*
2. anT In
To connect to your terrestrial antenna or cable TV using coaxial cable*
