10
Sort
(gReen button)
You can sort channels by
Name a~z, Name z~a, Free-CA, Fav–NO Fav
or
Frequency Low-High.
Edit
(YelloW button)
Select the channel you want to edit and press YelloW (Edit) to enter
the modification submenu. Here you can edit
Program Name, Frequency,
Symbol rate, Video PID
and
Audio PID
.
Move channel
Press
pq
to highlight the desired channel, press
tu
to highlight
Move
and press oK to confirm selection of the channel. Use
pq
to move the
channel to its new location and press oK to confirm. Repeat this for every
channel you want to move.
Delete channel
Press
pq
to highlight the desired channel, press
tu
to highlight
Del
and press oK to mark the channel for deletion. Press eXIT and confirm
the channel’s deletion by selecting oK and pressing oK.
Delete all channels
To delete all the channels from the current satellite, press blUe (Del All).
You will be asked to confirm this operation.
5.1.2 favourites Manager
Press
pq
to select the desired channel and
tu
to highlight the favourite group. Press oK to add
the selected channel to the favourite group. Repeat this operation to remove the channel from the
favourite list.
5.2 Installation
The installation menu consists of sub-menus
“Antenna Installation”, “Auto Scan” and “Manual
Scan”
.
5.2.1 antenna Installation
You can add, edit and delete a satellite in this menu.
Add satellite
Press the ReD button. A satellite list will appear. Use
tu
to select the desired
satellite. If the desired satellite is not in the list, select
“NEW SAT1”
. After
selection of a satellite, the
Configure Antenna
menu will appear. Use this menu
to set the L
NB Type, LNB Low Freq, LNB High Freq, Band control, Polarisation
control, DiSEqC Switch
and
Antenna mode
. Further steps of the installation
process are described in chapter 4.2.
Edit satellite
If the parameters of a satellite were changed or if you wish to add a new
satellite, you must set the parameters of the satellite, such as
LNB type,
LNB low Freq, LNB High Freq, Transponder, LNB Power, 22k Tone, DiSEqC
and
Antenna Mode
. The sequence of editing satellite parameters is the
same as the sequence of
Add satellite
described in chapter 4.2
Delete satellite
If you want to delete a satellite from the list, press YelloW. A warning
message will appear. Select oK and press oK to confirm.
