12
5.3.1.3 Time Settings
If a broadcaster provides GMT, you can set the time using GMT or set the time manually. If the
GMT usage is
ON
, you need to set the Time Zone. If you set GMT Usage to
OFF
, Set Data and Set
Time are displayed. To set the time value manually, move the cursor to the time item and use the
numeric buttons on the remote control.
5.3.1.4 auto Standby
This option allows you to set the desired Auto Standby time or to disable Auto Standby. Auto
Standby will switch the receiver to standby automatically when it doesn’t receive commands from
the remote control for a given period of time. Possible settings are:
1~6 Hours
and
Disable
. The
default setting for Auto Standby is 3 hours. To avoid the automatic switch off, set
Auto Standby
to
Disable
.
5.3.1.5 Set factory Default
Please use this function carefully, as it will erase all the data and parameters you may have set
earlier. Once you set the factory default you will have to re-install your preferences and re-scan
channels. To reset your receiver to factory default, apply the following steps:
Select
Set
Factory default
and press oK. Confirm the warning message with oK and press oK. The
receiver will return to its factory default state and all user data will be deleted.
note:
Your PIN code will be reset to the factory default:
“
0000
”.
5.3.2 oSD Style
Use this menu to set the Menu Colour, Transparency Level and Border Pattern.
5.3.3 parental Control
Use this menu to set Channel lock status (
ON
or
OFF
), the Menu lock status, Parental setting and
Change PIN code
.
The default PIN code is "0000".
Channel Lock
Set the system channel lock to
ON
or
OFF
. If lock is
ON
, a locked channel can only
be watched after entering the parental PIN.
Menu Lock
Press oK to select whether the menu should be locked or not (
YES
or
NO
) and
press oK to confirm. If the menu lock is
ON
, some operations such as search
program and set factory default can only be accessed after entering the PIN.
Parental Setting
If a channel is locked, it can only be watched after entering the parental PIN code.
Use
pq
to select the channel you wish to lock. Press oK to lock the channel.
Change PIN
To change the PIN, please enter and re-enter the desired 4 digit code. The system
PIN will then be changed to the new PIN.
5.3.4 System info
Shows information about your receiver such as software, user interface version and our website
address.
