Strong SRT 4120 Manual Download Page 30

Page: 30 / 35

&OHMJTI

7. TROUBLE SHOOTING GUIDE

Trouble

Possible reasons

What to do

No picture or sound.

No signal or weak signal.

Check the LNB and scart connectors

and the dish installation.

The settings you have

The digital set-top box was

Before unplugging your

done in the menus have

unplugged without first

digital set-top box, wait for

not been changed.

going to standby.

The remote control is not working.

The digital set-top box is in standby. Press the standby key

check if nothing blocks the front panel.

Remote control is incorrectly aimed. Change the batteries.

Battery exhausted.

You see the on-screen error message The dish installation is not correct

Check the connections.

related with LNB short-circuit

or cable connections have been

If the problem persists, contact with

protection mode.

made incorrect.

the closest service for help.

All manuals and user guides at all-guides.com

Summary of Contents for SRT 4120




































Search results

Summary of Contents for SRT 4120

Reviews:

Related manuals for SRT 4120

Brands by name

Popular brands

Strong SRT 4120, Manual

Search results

Summary of Contents for SRT 4120

Reviews:

Related manuals for SRT 4120

Brands by name

Popular brands