2. Back up all of the data in the USB storage device in case data is lost due to an unexpected
accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data
backup is consumer's responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB
mode otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only)
file system provided with the Windows operating system. In case of a storage device formatted
as a different utility programme which is not supported by Windows, it may not be recognized.
7. When using a USB Hard Disk Drive which is not powered independently, ensure its power does
not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull
out the USB Hard Disk and restart the TV system.
8. An "Unsupported File" message will be displayed if the file format is unsupported or the file is
corrupted.
9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
10. This TV may not support some multimedia files changed and upgraded as the change of the
encoding format or other technical aspects advances.
11. Please refer to chapter
9. Appendix
for a list of supported file formats for USB playback.
6.2 USB menu
Press
Source
. Press
p
q
to select
Media
, then press
OK
. You can view movie, music and photo files from
your USB storage devices. Connect a USB storage device to the USB input terminal and select the types
of media on the home page:
Movie
,
Music
and
Photo
. Press
OK
, the screen will show the connected USB
device, press
OK
again to view the file folders and files. Press
pq
to select a folder, press
OK
to open the
folder and select the files, then press
OK
to tick them. Highlight the one you want to play first, press
u
2
to start playing or select a file and press
u
2
to start playing directly. Press
3
to stop playing and return
to upper lever folder. Continuously press
Return
to go back to upper level folder. Repeat again to select
and play another media type.
NOTE:
By choosing one of the three media types, for example
Movie
, the folders
inside will display only video files and no other formats.
6.2.1 Play movies
Fig. 6
Press
INFO
to display/exit from the menu bar (
Fig. 6
).
Play & Pause/Stop/Prev./Next
Press
u
2
to play or pause the playback. Press
3
to stop playing. Press
7 8
to play the previous or the next video file. Press
INFO
and use
t
u
to
highlight the corresponding icon on the control bar, then press
OK
. The TV
will response accordingly.
Fast Reverse/Fast Forward
Press and hold
5 6
for seconds to draw the playing progress as your desire,
then press
u
2
to start the playing from the new position.
Information
Highlight the corresponding icon and press
OK
to view the information of the
playing video.
Go to time
Skip to specific point by input time. Highlight the corresponding icon and
press
OK
to open the Input search time screen. Press
t
u
to move the cursor
14
