5.2.6 Channel settings
Programme Edit
Edit the programmes. You can press the
COLOUR BUTTONS
on the remote
control to skip programmes, rename and delete programmes or move
programmes.
Schedule List
Press
pq
in the
Channel
. Select
Schedule List
, then press
OK
to enter the sub-
menu. Use the
COLOUR BUTTONS
to modify your settings.
Signal Information
Showing the information of current DTV channel. Only available with DTV
signal.
Cl information
Enables the user to select from the CAM-provided menu. Select the
Cl
menu
based on the menu PC card.
5.3 Picture menu
Picture Mode
Press
pq
to select the
Picture mode
, then press
OK
. Available choices are
Dynamic, Standard, Mild
and
Personal
. You can change the value of contrast,
brightness, colour, tint and sharpness when the picture is in
Personal
mode
only.
5.3.1 Contrast/Brightness/Colour/Tint/Sharpness
If
Picture Mode
is set to
Personal
you are able to change the following settings:
Press
pq
to select an option, then press
t
u
to adjust.
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Brightness
Adjust the optical fiber output of the entire picture, it will affect the dark
region of the picture.
Colour
Adjust the saturation of the colour based on your own preference.
Tint
Adjusts the balance between the red and green levels.
NOTE:
Tint is available to be adjusted only when the system of the video signal is
NTSC.
Sharpness
Adjust the peaking in the detail of the picture.
5.3.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press
pq
to select
Colour Temp
, then press
OK
/
u
to enter a submenu. Press
pq
to select the relevant
picture effect (DEFAULT:
Normal
).
Cold
lncrease the blue tone for the white.
Normal
Increase the neutral colours for the white.
Warm
lncrease the red colour for the white.
5.3.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press
pq
to
select
Noise Reduction
, then press
OK
/
u
to enter a submenu.
10