25
Strong Enterprises owner’s manual. Para-Cushion
www.strongparachutes.com [email protected]
6.5.10
Seal the bottom most pin (pin
furthest
from
the
housing).
Complete the data card and your
rigger’s logbook.
6.5.11
Snap all the snaps to secure the
backpad in place.
6.5.12
Turn rig over and remove pilot
chute locking rod and strap.
Use a fid to tuck the excess pilot
chute fabric under the rim of the
cap. Dress the pack neatly. Be sure
the ripcord handle is secure in its
pocket.
When the pack job is finished, the
pilot chute should be centered on
the back, and sunk down below the
sides of the pack.
! WARNING !
Count your tools to
assure you have not
left any in the packed
parachute.
