R6RT Model Specifications
Your RocknRoller Multi-Cart shipping box should
contain a frame and the following parts:
Recommended Tools For Assembly
Length (Compact)
28”
2 x
½” flat washers
Length (Extended)
42.5”
2 x
½” lock nuts
Channel Lock Pliers
(not included)
Width (Frame Bed)
12.5”
1 x 1” (25 mm) square plastic endplugs
Width (Rear Wheels)
18”
1 x
¾” (20 mm) square plastic endplugs
Height (Folded)
9.5”
2 x
1/8
” x 1 ¼” cotter pins
Height (Unfolded)
33.25”
2 x
20 mm flat washer
Front Casters
4” x 1”
2 x
8”x 2” (200 mm x 64 mm) rear wheels
Rear Wheels
8” x 2.5”
2 x
4”x 1” (100 mm x 25 mm) stem casters
Weight
22 lbs.
1 x
Flat Wrench
Load Capacity
500 lbs.
1 x
Assembly/instruction sheet
1. Installing Rear Wheels
Gently slide wheel over axle as shown.
Do not force wheels onto axle. It is
recommended to lubricate axles with light
grease before installing. Install cotter pins
and bend ends outward.
2. Installing Front Swivel Casters
Attach front swivel casters as shown. While tightening lock nuts, grip
bearing cap with channel lock pliers or pipe wrench to prevent threaded
stem from turning. Tighten lock nuts firmly, but not excessively tight.
Check lock nut tightness on caster stems periodically.
