Strobel VTD410EV-SEPC1, Operating Instructions Manual

Page: 7 / 36

3
BA_VTD410EV-SEPC1_A1_140417_en
1 General notes on safety
The non-compliance with the following notes on safety can lead to bodily
injuries or to damages of the machine.
1.
The machine must only be operated by persons familiar with the relevant
operating instructions and who have been instructed accordingly.
2.
Before commissioning also read the notes on safety and the operating
instructions of the sewing drive manufacturer.
3.
The machine must only be operated according to its designation and not
without the appropriate guards; all explicit safety regulations must also be
observed.
4.
For threading, for changing the reels, for exchanging sewing tools such as
needles, grippers, stitch plate, transport devices, if necessary cutter and
cutting block, for cleaning, when leaving the workplace and for
maintenance work, switch off main switch or pull mains plug. With a
mechanically operated coupling motor without activation lock, wait until the
motor has stopped.
5.
General maintenance work must only be carried out by appropriately
instructed persons in accordance with the operating instructions.
6.
Repair, modification and maintenance work must only be carried out by
qualified staff or by appropriately instructed persons.
7.
During maintenance and repair work at pneumatic devices, the machine
must be disconnected from the pneumatic supply network. Exceptions are
only admissible during adjusting work and function test by appropriately
instructed qualified staff.
8.
Work at the electrical equipment must only be carried out by qualified
staff.
9.
Work at parts and devices under voltage is not allowed. Exceptions are
regulated by the regulation EN50110 (DIN VDE0105).
10.
Modification or alteration at the machine must only be undertaken under
consideration of all explicit safety regulations.
11.
Only spare parts released by us for use are to be used during repairs.
12.
The commissioning of the upper part is prohibited until it has been
determined that the entire sewing unit complies with the regulations of the
EC guidelines.