Strobel VTD410EV-SEPC1, Operating Instructions Manual

Page: 18 / 36

14
BA_VTD410EV-SEPC1_A1_140417_en
4 Instructions for use
4.1 Needles and threads
Use needle type 134.
Since there are several needle points available for the different materials to be
sewn, choose the most suitable needle point according to the needle
manufacturer's catalogue. Recommended needle type for leather is 134 LR, for
textile material 134 R.
When sewing fixed parts it may happen that the needle eye pastes up and
there is no correct loop formation.
Thicker and hard materials require thicker needles.
G u a r a n t e e d r e m a r k !
This machine has been set and sewn off with genuine
Strobel needles .
No guarantee can be granted if the settings are modified
for using different needle types.
4.2 Inserting the needle (Fig. 8)
A T T E N T I O N !
Switch off the machine electrically and make sure that the
machine is really in the standstill position by stepping the
treadle for the motor control before changing the needle.
Otherwise
DANGER of finger bruises and needle through-
stitches.
Introduce the needle with its horizontal groove pointing downwards, push it to
the rear until it strikes against the needle stop 134.0251 (Fig. 8), then clamp it
by means of the screw 171.0406 (Fig. 9).