background image

Headset basics

User manual

support.strivr.com

3

Headset basics

PICO G2/4KS (UNDERSIDE)

VOLUME 

CONTROL

POWER AND 

INDICATOR 

LIGHT

CHARGING 

PORT

HEADPHONE 

JACK

COLOR

STATE

MEANING

Red

Solid

Low battery (Pico G2/4KS: less than 15%; Oculus Go: less than 20%)

White

Solid

Screen is on

White

Blinking Oculus Go is rebooting

Orange

Solid

Headset is starting up

PLUGGED IN:

Green

Solid

Battery is charging (Pico G2/4KS: above 95%; Oculus Go: above 90%)

Orange

Solid

Oculus Go is charging (below 90%)

Yellow

Solid

Pico G2/4KS is charging (below 90%)

Red

Solid

Low battery (Pico G2/4KS: less than 15%; Oculus Go: less than 20%)

H E ADSE T LIG H T I N DICATOR M E AN I NG S

OCULUS GO

CHARGING PORT

HEADPHONE JACK

POWER AND 

INDICATOR 

LIGHT

VOLUME

Powering on the headset

To turn the headset on, press and hold down the power button located on the top of the headset for about 

5 seconds or until the indicator light next to the power button turns blue. To check to see that it is powered 

on, hold the headset up to your eyes and the screen inside will illuminate. If the power button is accidentally 

pressed during training, the display will go to sleep. Short press it again to turn the display back on and 

resume training.

Charging the headset

Plug the headset into the charge cable whenever it is not in use for training. If you have an Oculus Go headset, 

ensure that the headset is powered on before plugging it in so that the device can receive updates. From a full 

charge, the headset will last approximately two hours. You may check the precise battery level percentage in the 

menu of the headset. When the light on the top of the headset turns red, the battery is low. 

Summary of Contents for Pico G2





























Reviews: