Facilitating training
User Manual
7
Facilitating training
Headset wi-fi connection
It’s important that headsets are connected to the Strivr cloud to transmit training results and to receive content
and system updates. For systems with stand-alone headsets (system does not include a management device),
check the connection before each training session and at the end of the day. Systems with management
devices connect through those.)
1. Put the headset on and
log in.
2. On the program
selection screen, select
the About button.
The status should say
Connected to Strivr.
Pico G2/4KS headsets only: If you see
Wi-Fi not enabled
or
Not Connected to Wi-Fi
on the About screen:
1. Open wi-fi settings by holding touchpad-UP + trigger
on the controller for 3 seconds.
2. Make sure Wi-Fi is set to On.
3. Select your wi-fi network and key in the password.
NOTE:
If your company uses a Mobile Device Management (MDM) system, you may not be allowed to
select a wi-fi network. Contact your MDM admin for more information.
HOLD
TRACKPAD UP
+ TRIGGER
