31
SAFETY INSTRUCTIONS
READ
the user instructions carefully and especially observe the safety information. If you do not
follow the safety instructions and information on proper handling in this manual, we assume no
liability for any resulting personal injury or damage to property. Such cases will invalidate the
warranty.
Also, observe the safety instructions in the individual chapters of this manual.
YOUR RESPONSIBILITIES:
Electrical appliances and batteries can expose people to hazards that can cause serious injury
or death. The use of electrical products and batteries can present hazards including, but not
limited to, injury, fire, electric shock, and damage to the electrical system. These safety
instructions are intended to give you the information you need to use the
STREX
LED Disco
Ball Effect Sphere and to avoid such hazards.
Contact us by email at
, if you have questions that remain unanswered by these warnings &
safety instructions.
General Device Safety
●
Do not use the LED Disco Ball Effect Sphere for any other purpose other than its intended use (see
the chapter “Intended Use”).
●
The LED Disco Ball Effect Sphere is designed and intended for private use and is not suitable for
commercial purposes.
●
This LED Disco Ball Effect Sphere is intended for indoor use only. Do not use it outdoors.
●
Handle the device carefully. Jolts, impacts, or a fall even from a low height can damage the device.
●
Do not place the LED Disco Ball Effect Sphere on an unstable surface.
●
For wall or ceiling mounting, the bracket must be mounted with the correct screw and plug. Follow
the guidelines as stated in chapter “Installing the product”.
●
Do not place the LED Disco Ball Effect Sphere under mechanical stress
●
Never drop or insert any object into any opening.
●
Do not apply excessive force when using the buttons on the remote controller.
●
Do not leave the switched-on LED Disco Ball Effect Sphere unattended. Close supervision is
necessary when used near small children.
●
Avoid direct eye contact with the light rays when the device is on.
●
If it is no longer possible to operate the LED Disco Ball Effect Sphere safely, take it out of operation
and protect it from any accidental use. A safe operation can no longer be guaranteed if the device:
is visibly damaged,
is no longer working properly,
has been stored for extended periods in poor ambient conditions or
has been subjected to any serious transport-related stresses.
You can take the device out of operation by removing the power cord or by cutting off the mains plug of
the power cord.
