35
CLEANING
●
Unplug the LED Disco Ball Effect Sphere always from the mains socket before cleaning.
●
A soft dry cloth is recommended for cleaning the exterior of the LED Disco Ball Effect Sphere and
the remote controller.
●
Do not immerse the devices in water or any other liquids. It is not allowed to rinse the appliance with
water, to prevent the water from leaking into the electrical circuit and causing malfunctions.
●
Under no circumstances use aggressive cleanings agents, cleaning alcohol, or other chemical
solutions since these can penetrate the housing or impair functionality.
●
Do not use a wire brush, steel wool, or other abrasive objects for cleaning.
●
Cleaning must not be performed by children unless supervised.
MAINTENANCE & SERVICE
The LED Disco Ball Effect Sphere and the remote controller do not require any maintenance. Do not
disassemble the device.
WARNINGS:
●
Do not attempt to open the devices for maintenance. Removing the housing or improper
reassembly may cause damage, short circuit, or fire.
●
If for any reason you open the housing, the warranty will become null and void. The devices
contain no user-serviceable parts. The LEDs cannot be replaced.
●
To obtain maintenance or service, please contact us first at our email address
.
Repairs should only be carried out by an expert or a qualified shop.
STORAGE & TRANSPORT
●
We advise cleaning the devices before long time storage.
●
Store the devices in a place not exposed to sunlight & humidity, which is dust-free.
●
Do not store the devices in extremely high or extremely low temperatures. This can damage the
device.
●
Store beyond the reach of small children.
●
Remove the battery from the remote controller before long-time storage.
●
Protect the device against vibrations and shocks during transport.
●
After transport or storage at cold temperatures, the devices must be accustomed to room
temperature for approx. 30 minutes due to possible condensation. After that, the devices can be
used.
