12
UNPACKING AND ASSEMBLY
This section refers to the assembly of the StreetStrider 8r. To assemble your StreetStrider 8r, first view the StreetStrider Workshop
videos provided on www.StreetStrider.com/support, then follow the steps and photos in this section. Included in the shipping box are
the StreetStrider in parts, Luggage Rack, Owner’s Guide, Assembly Checklist, Warranty Information, and a small box strapped to the
rear drop outs containing the StreetStrider tool kit, a packet of assembly screws, the bottle cage, and instructions for the operation of
the rear internal gear hub. The tool kit contains a 19 mm socket wrench, 12 x 15 mm and 12 x 17 mm open end wrenches, and 2, 3,
4, 5, 6 and 8 mm hex wrenches.
OPENING THE BOX
The StreetStrider comes in a large box
(Fig. 3-1A)
with graphics on either side, to show which side is up. Open the box with a sharp
edge to cut the top flap. Notice how the two end flaps secure each end of the folded StreetStrider inside
(Figs. 3-1B)
. The front end
beam has corner padding for protection. The two front wheels are secured to the front head tube and the rear wheel is secured to the
middle of the frame.
A
B
Figure 3-1. Opening the box
