background image

streetersuperstands.com

Your Super Lift comes with Arm Stop Ad-

justing Bolts located on the main base.  

These are preset at the factory, however 

you may need to adjust as needed for 

your kart/use.  The arms of the stand will 

need to sit far enough back to prevent 

the stand/winch from pivoting forward 

on its own, though not far enough back 

as to come in contact with the control 

handle.

This is an important step in the assembly of your Super Lift and we suggest 

you follow it:

At this time you should grab a favorite beverage of your choice.  Find a nice 

comfy chair close to your Super Lift.   Enjoy your beverage and admire the 

completed Streeter Super Stands Super Lift before you.   It is now from this 

moment forward that your racing endeavours will be easier and your family 

and friends will be ever so happy as to not have to help lift your kart.  Cheers 

to You and Thank You for your purchase of a Streeter Super Stands product!

We appreciate your purchase and of course we fully back our products, however the assembly, care, use and proper operation 

of this stand is your responsibility.  Do not attempt to lift your kart unless you are sure of the lifting hooks position and you are 

also comfortable with the use of this stand.  The potential for injury is present and the user accepts all liability as such. Streeter 

Super Stands is not responsible for personal injury, any damage to the stand, kart or surroundings due to misuse or wrongful 

assembly.  User is responsible for the proper assembly, usage and care of the stand.  Never exceed the intended use and capacity 

of the stand. Streeter does not condone nor off er warranty or reimbursement of damage to stand or items from transport of kart 
on stand- user assumes all risk.  

Need further assistance or 

additional items for your Su-

per Lift?  Contact us at (262) 

457-5018

Summary of Contents for SUPER LIFT









Reviews: