streetersuperstands.com
Chains are semi-installed on the stand.
You will need to tighten the bolts that
attached them to the stand arms. Make
sure the chain links are not kinked and
that each side is extended equal.
Turn the winch knob to “Free Wheel”
mode. The drum should be able to
rotate as to pull the strap (AS NEEDED in
the next steps) out from the spool/drum.
Winch strap should be ran as shown. Un-
der the inner frame rail and in between
the handle post and roller.
Do not pull excessive strap from the
spool/drum.
Do not pull excessive strap from the
spool/drum.
Pin and roller on upper portion of the
stand is then removed and then re-
installed going through the loop of the
winch strap.
Re-spool any possible excessive strap
that may have been pulled out. Upon
confirmation of this and proper rout-
ing, the winch can be taken out of “Free
Spool” mode and back to engagement
mode.
