Preparation for Installing the Motherboard
The FC9 can accommodate a Micro-ATX or Mini-ITX motherboard and
depending on which one is used, the appropriate stand-offs should be
fitted to the bottom panel of the case. Note that the Mini-ITX stand-offs
are already fitted to the case as they are common to all motherboards.
The type of motherboard used will also determine the choice of other
internal components such as additional 3.5" hard drives and optional
internal PSU. Check your motherboard hole locations and fit the
appropriate stand-offs in the corresponding position on the bottom panel.
The stand-offs can be hand tightened in place.
mITX
mATX
Installing the I/O Shield
Locate the I/O shield supplied with your motherboard and firmly push it in
place. Ensure that it correctly seated otherwise the motherboard will be
difficult to install and not align correctly with the stand-offs.
5
HS-M3x7
