Fitting Drives to the Lower Side of the Drive Tray
The lower side of the drive tray can accommodate a maximum of 1 x 3.5" drive or 2 x 2.5" drives.
The 3.5" mounting uses slots instead of fixed holes, to allow the drive to be fitted anywhere along the tray and with different orientations. The drive is secured to the
tray from the side using thumbscrews which fit through the slots and into the side mounting holes of the drives. The 3.5" drive should only be fitted after all other
drives are mounted to the tray.
If you prefer to use the lower side of the tray for 2.5" drives, they are secured to the drive tray using 4 screws per drive as shown below.
13
CS-M3x5
TS-6#32
3.5" Drive
2.5" Drive
